Nano Foam Vehicle foam shampoo

How to Use:

• Shake well before use (Pigment separation is normal and will not stain)
• Dilution Ratio-Hand Pump Sprayer 1: 800, Foam Cannor: 100-150 g per 11 of water
• Application-Spray evenly from top to bottom, Allow to dwell for 2-3 minutes
• Rinse High-pressure rinse from bottom to top, Recommended settings:
• Pressure: 9-13 MPa, Water Flow: 15-20 L/min, Fan Angle: 25″
• Drying-No wiping required during cleaning-Dry using a clean microfiber towel

Caution:

• For external use only
• Keep out of reach of children and pets
• Avoid contact with eyes and prolonged skin exposure
• If product gets Into eyes, rinse Immediately with plenty of clean water
• Do not ingest. If swallowed, seek medical advice Immediately
• Do not use on hot surfaces or under direct sunlight
• Store in a cool, dry place, away from heat and direct sunlight
• Do not mix with other chemicals or cleaners
• Test on a small, inconspicuous area before full application

Support:

• alphadetailf2f@gmail.com